Use Your Mac OSX As a Wirelss Adapter for Your XBOX 360: I saw another guide. Now go to your internet browser and enter in your router's IP Address in the. Go to the 'System' blade on your dashboard. Go down to 'Network Settings.' Now select 'Edit Settings.' Select your IP settings and choose 'Manual.' Now enter 10.0.0.2 as your IP Address, 255.255.255.0 as your Subnet Mask, and 10.0.0.1 as your Gateway and hit done. Go ahead and test it right now, it will fail. Now go back to edit network settings and select your DNS settings this time and once again choose 'Manual.' Enter in the IP Address that is on the bottom of your router as your Primary DNS Server (mine would be 192.168.1.1). Now get out that IP address that you obtained earlier from your router and enter it in as your Secondary DNS Server. Select done and test your connection. Why doesnt goal seek work in excel for mac. Hey if your looking to get open NAT then download the WATERROOF (mac os x) open it, enter in the 'NAT Setup', UNCHECK all the boxes above 'NAT Interface (WAN)' and name it as 'en1'. Add the following ports at the 'port redirections': 88 udp, 3074 udp/tcp. Using the latest software, drivers and firmware helps ensure optimal performance of your Kodak all-in-one printer/scanner. KODAK All-in-One Printer Home Center Software (including drivers) – MACINTOSH Operating Systems. With this version of software, you can easily download PrintProjects software, which helps you design, print, and share photo cards, calendars, books, and more. Close all programs. Connect your printer to the computer. Turn on your printer. On your computer, double-click the *.dmg icon and then follow the on-screen instructions. By downloading from Kodak, you agree to the terms and conditions outlined in the license agreement. To determine if your MAC OS is compatible with KODAK All-in-One Printer Software: Go to www.kodak.com/go/aiodownloads. Select the link for 'KODAK All-in-One Printer Home Center Software (including drivers) - MACINTOSH Operating Systems'. The compatible operating systems are listed under the System. The ip LAN is the ip you gave for your xbox (10.0.0.2 in this instructable) and the WAN ip is the one it shows in your router's setup (the blank host name one - you'll see). Enable it and put it to auto-start. If you dont get the NAT open, you'll need to port forward your router too. You can look for it at the www.portforward.com i will make an instructable someday, i dont have time now. Feel free to ask me any questions. What you probably don't understand quite well it's my poor english hahaha. You need to excuse, it isn't my native language. I just can't help much more because i've stopped playing xbox since july 2010 and i don't open waterroof since then. (just tried now under 10.7.2, couldn't open) but my guess is: LAN IP: 10.0.0.2 (if you followed this instructable) LAN Port: 88 udp WAN IP: (check router setup, tip: google it) WAN Port: 88 udp (again, i guess) than repeat with the 3074 tcp/udp. Sorry but i can't help any more of that. If, like me, you have your Xbox 360 placed near your wifi-enabled computer, but away from your wireless router or modem, then you'll want to take advantage of the Xbox's ability to 'borrow' your computer's internet connection. For Windows users, this process is simple; it's just a matter of 'bridging' your computer's wifi connection to your PC's ethernet port which is plugged into your Xbox. For Mac users, the process ain't so easy. What follows is a guide for getting your Xbox 360 to accept Mac OS X's internet sharing option. This method worked for me, although there are several methods dotted around Mac forums on the net that seem to work for other people: • Mac OS X hints thread: • • • Apple Support forums: Before you start configuring, open up Terminal (in Applications -> Utilities) and type 'ifconfig en0' (zero, not a capital-o). You're looking for the bit that says 'inet xxx.xxx.xxx.xxx'. In my case, the number I get here is 192.168.2.1 Second, note down the IP address of your wireless router, which in my case is 192.168.0.1 On your Mac • Connect your Mac to your wireless internet connection • Connect your Xbox 360 to your Mac via Ethernet • In System Preferences -> Sharing, enable Internet Sharing between your Airport and Ethernet connection On your Xbox 360 • Start up your Xbox and navigate to the Network settings menu • Under IP address, enter the number you got from the 'ifconfig en0' command earlier on, but with the final number one place higher. In my case, I take the 192.168.2.1, and input 192.168.2.2 in the IP address box on my Xbox 360. • Under subnet, input 255.255.255.0 • Under router/gateway, enter the number you got earlier from the 'ifconfig en0' command. In my case, that's '192.168.2.1' • Move onto DNS. Enter the IP address of your wireless router (in my case, '192.168.0.1') in both the primary and secondary IP address fields • Leave PPPoE and Advanced settings blank (i.e. OFF and Automatic) • You should now be able to connect to Xbox Live via your internet sharing Mac If you manage to get this method, or a similar method working, don't forget to drop by the comments thread to record your experience!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |